How To Make Soap With Stick Blender

If you use my link to make a purchase, I will receive a small commission at no additional cost to your purchase.

Making soap at home can be a lot of fun, and it is also very rewarding.

You may think that you need to have a bunch of fancy equipment in order to make soap, but this couldn’t be further from the truth!

All you really need is some good old-fashioned elbow grease and patience.

In this post, we will show you how to make handmade soaps with just one kitchen appliance: your trusty stick blender.

Why Stick Blenders are Good for Making Soap

A stick blender is a great tool to use when making soap because it will help you mix up the ingredients quickly and thoroughly.

It also has an advantage over other kitchen appliances in that its blades can reach all of those hard-topped corners, so there’s no need to worry about any unmixed bits!

The best part? You don’t have to spend hours stirring by hand or using your hands at risk from lye burns – just let this handy appliance do most (if not everything) while still giving yourself some time off every now and then to enjoy life outside with friends & family…or even make more batches if desired.

How to Use a Stick Blender for Making Soap

handmade soaps

Ingredients

1. Soap base

2. Fragrance oil

3. Liquid soap (optional)

4. Essential oils (optional)

Method

If you have some or all of the ingredients and want to make soap, then here’s how.

  1. First, gather a stainless steel pot with a spout and pour in 16 ounces of water over medium heat.
  2. Pour vegetable oil and melted tallow into the pot as it heats up.
  3. When it reaches about 125 degrees Fahrenheit, add lye that has been mixed with warm water in two stages.
  4. Once mixed well, remove from heat and stir until thick white substances disappear off the bottom of the pan- this means lye is fully incorporated into oils!
  5. To help the process move along quicker, use an immersion blender at high speed for 3 minutes or until really liquidy batter forms at the top.

Best Practices

  1. Use a stainless steel pot with a spout, not aluminum or copper.
  2. Don’t use plastic containers for lye and oils because they can melt together if the temperature is too high! Stick to glass jars instead.
  3. If you want your soap scented then add essential oil at this stage of mixing in order that it doesn’t get diluted by water later on when making liquid soaps (optional).
  4. Make sure any ingredients are well mixed before adding them into the batter as some may sink down more than others due to gravity which will cause separation during the cooking process; stir until all contents have been evenly distributed throughout the mixture.
  5. Stir continuously while using an immersion blender.
  6. Do NOT let kids help make homemade laundry detergent recipes without supervision from adults.

What Stick Blenders Are Good For Soap Making?

  1. When it comes to making lotion and soap, there are a few good options that will work well for the money. I have two stick blenders in my kitchen: one from Cuisinart and another more affordable option from Hamilton Beach. Both of these offer different features but both can do just as great a job when you’re looking for an easy way to make your own soaps at home!
  2. Stainless steel is a much better material for mixing. I don’t like the ones with plastic because they can melt or crack depending on what you are doing and from how long it has been in use, so using stainless steel keeps things safer while performing your task.
  3. Removable mixing ends are a plus. I also prefer stick blenders with detachable heads that can be washed without the worry of the motor getting wet or being damaged.
  4. If you’re using a stick blender, it’s best to use one with an on/off switch and not just the button that turns off when pushed down all the way (i..e., fully depressed). This is because if your ingredients are too hot or cold – they’ll cause overheating which will shorten its lifespan so make sure everything has been mixed together well before turning this appliance back onto high speed again for processing in order to avoid damaging any part inside from overuse as these parts can be expensive! It also helps keep things moving around more evenly without clumping up into big chunks like what happens sometimes during stirring by hand where some lumps may form while others won’t get incorporated at first but eventually will.

Here are our choices for the best stick blender for soap making.

Stick Blender Overheating? Here’s What To Do

If your stick blender is overheating, there are a few things you can do to try and fix the problem.

First of all, make sure that it has been fully submerged in water for at least five minutes before use as this will help prevent any buildup on blades or motor from causing an issue with heat production during operation.

Secondly, if possible turn down speed settings so they aren’t running too fast which could cause them to overheat more quickly than desired

Lastly, check blade assembly by removing the head attachment piece (if removable) then remove the top cover plate where attachments attach – be careful not to touch anything inside!

If everything looks good, reattach pieces together again making note of how each part goes back into place just like when first assembled- don’t forget about tightening the screws!

If you are still having problems with overheating then it could be that the motor is not getting enough water to cool down. This can happen if there isn’t a sufficient amount of liquid in your container or because too much air has been introduced into the mixture during the mixing process.

Try adding more soap and fewer liquids until desired consistency has been reached.

If this doesn’t work, check blade assembly again as well- make sure blades have no buildup on them which would prevent proper contact between head attachment piece (if removable) when attached back together after the cleaning cycle completes.

Lastly, always remember never to leave the appliance unattended while running at any speed setting so they don’t overheat unnecessarily before shutting off completely by themselves once complete.

What Else Can I Use?

If you don’t have a stick blender, there are other ways to make soap. You can use an old-fashioned whisk or even your hands!

If using the latter two methods for stirring ingredients together in order to create lather and suds – be sure not to overmix as this will cause bubbles that won’t pop when heated up later on during processing (i..e., boiling).

This is because they’re made of air rather than water molecules which expand at higher temperatures but shrink back down again once cooled off enough.

So, it’s safe to handle them without getting burned by their heat energy content while still hot from being boiled with all those oils/fats mixed into liquid form inside each bubble until fully melted away leaving only trace amounts of soap left behind.

Cleaning

It’s important to clean your stick blender after each use.

This is because the oils and fats that are left behind on it from making soap can cause a buildup of bacteria which will then lead to mold growth over time if not taken care of properly by cleaning with hot water, dishwasher detergent, or other similar products designed for this purpose in order to remove all traces before storing away until next used again later down-the-line.

Conclusion

If you’re looking for a quick and easy way to make soap, then using your stick blender may be worth considering.

Rather than having to use expensive equipment or wait around until the ingredients melt on their own, this tool will allow you not only to mix oils with fats but also heat them up so they are easier for these ingredients in order to liquefy.

Plus there’s less time needed overall which can work both ways depending on how much patience one has when waiting around while things cool down again afterward!

Stick blenders aren’t just limited strictly towards making homemade handmade bars either as these same tools have other uses too such as blending together wet foods like smoothies and purees into a delicious mixture.

About Kelly A Hartigan

Kelly A Hartigan has been an avid consumer of blenders for years. She is passionate about helping others find the best blender for their needs and has tried different brands on her quest to find the perfect match.

She loves to blend fruit and vegetables into juices, which she drinks throughout the day for good health.

Leave a Comment