Is Blendtec Blender Dishwasher Safe?

If you use my link to make a purchase, I will receive a small commission at no additional cost to your purchase.

Blendtec blenders are dishwasher safe.

The blade assembly on the Blendtec blender is made of stainless steel, and as such, it should not rust when placed in a dishwasher. 

This means that you have less to worry about when cleaning your blender post-use and can simply place it in the dishwasher without fear.

In this article, we will discuss whether Blendtec blender can go in the dishwasher how to clean your Blendtec blender in a dishwasher.

Can Blendtec Blender Go In The Dishwasher?

blendtec blender

Yes, Blendtec blender is dishwasher safe. This makes it very easy to clean your blender: simply pop it into the dishwasher with your dishes. 

Simply avoid using harsh detergents or bleach, and you won’t need to worry about rusting or corrosion.

When you put Blendtec blender in a dishwasher, make sure you choose either the top shelf or an upper rack of the dishwasher. If you place it in the lower rack, the water pressure may cause damage to your Blendtec blender.

It is highly recommended that you only place the jar portion of your Blendtec blender in a dishwasher. The lid and drive socket should be washed by hand.

How To Clean Blendtec In The Dishwasher

  1. You should start by unplugging your blender, ensuring that the reservoir is empty, and then turning it over to allow any excess liquid to drain out of the base area.
  2. Take apart the blade assembly and make sure that all parts are clean before placing them in the dishwasher. Ensure that there is no fruit or vegetable residue left behind, as this may begin to mold and grow while in the dishwasher.
  3. After you have taken apart all parts of the blender that need cleaning and ensured they are super clean, place them all inside your dishwasher on a regular cycle and wash them with hot water.
  4. After your wash is finished, remove all parts of the blender that were in the dishwasher, dry them off with a towel, and then reassemble your blender.
  5. Now you are ready to blend again!

What Can I Clean My Blender With?

After washing your blender in a dishwasher, you may need to clean the blade assembly. 

If so, simply use a dishwasher-safe scrubbing pad to remove any stubborn residue. Alternatively, you can soak the blade in warm water and vinegar for 30 minutes before cleaning it.

Is Dish Soap Safe For My Blender?

Dish soap is not recommended for your Blendtec blender. While the blade assembly is dishwasher-safe, harsh detergents can corrode your blender. 

This includes automatic dish soaps, which often contain perfumes and dyes that can be harmful to the longevity of your Blendtec blender’s components.

In addition, avoid using bleach at all costs! Bleach will harm the metallic components of your Blendtec blender’s blade, causing it to rust.

How To Store My Blender?

It is recommended that you clean your Blendtec blender immediately after use. 

This can help cut down on the time required to wash it later. If this isn’t possible, simply rinse any food off of it and allow it to dry before storing away.

If possible, keep your Blendtec blender on a high shelf or in an upper cabinet. This will prevent children from getting ahold of it and potentially harming themselves.

What If I Don’t Have A Dishwasher?

If you want to clean your Blendtec blender but don’t have access to a dishwasher, there are still ways to clean it. 

All you need to do is clean the jar with warm water and soap, scrubbing away any residue.

To clean the blade assembly, fill your Blendtec blender halfway with warm water and add a splash of vinegar. 

Turn on the blender at its lowest setting for up to 30 seconds to clean out any stuck-on food or residue. Rinse with warm water and air dry before using again.

If your Blendtec blender is particularly dirty or has food residue stuck to it, you can soak the blade assembly in vinegar overnight.

You Don’t Need To Buy An Expensive Cleaning Solution!

It isn’t expensive to clean a blender at home. A large bottle of dish soap costs less than a dollar, and vinegar is just as inexpensive. 

This makes it cheaper to wash your blender by hand than buying expensive cleaning solutions.

Is A Dishwasher The Best Way To Clean My Blender?

While washing your Blendtec blender in the dishwasher is an effective way to clean the blade assembly, it isn’t necessarily the best. 

If you don’t have a dishwasher, cleaning your blender by hand is preferable.

However, if you do have access to a dishwasher, washing your Blendtec blender in the dishwasher is certainly cheaper than buying expensive solutions from the store or from Blendtec.

How Can I Get Rid Of The Smell Of Vinegar From My Blender?

If you washed your blender with vinegar to clean it, but want the smell of vinegar gone from your jar, there are a few ways you can go about removing this odor. 

All you need is water and baking soda! Fill your blender halfway with water and add a tablespoon of baking soda. 

Turn on the blender at its lowest setting for 30 seconds or until the baking soda is fully dissolved. 

Pour out the water and rinse with warm water, then air dry before using again to get rid of that vinegar smell!

If you want to make sure your blender doesn’t smell like vinegar again, be sure to clean it immediately after use by following the steps above. This will prevent food or residue from sticking to the jar.

If you’re in a rush, fill the blender halfway with warm water and add a splash of vinegar. 

Turn on the blender at its lowest setting for up to 30 seconds until all of the vinegar has been dissolved and rinsed away. Air dry before using again to get rid of that vinegar smell!

Is There A Way To Avoid Food Sticking to The Blade?

To avoid food from sticking to the blade and making it difficult to clean, you can add a few tablespoons of water or dish soap before blending. 

This will help break up any food that does get stuck on the blade while also helping your jar be easier to clean when you’re done.

Cleaning The Lid

It is recommended that you clean the lid by hand as it cannot be put in a dishwasher. 

Washing the jar by hand can help cut down on how often your lid needs to be cleaned, but if this isn’t possible simply use warm water and soap to get any food or residue off of the lid. 

Do not clean the lid with any harsh chemicals and make sure it fully dries before putting it back on to keep your blender bacteria-free.

How Do You Clean A Cloudy Blendtec Jar?

Sometimes, even when cleaned immediately after use and put in the dishwasher on a regular basis, your jar can still end up getting cloudy. 

There are several ways to get rid of this cloudy film on the inside of your jar.

The simplest way is to add either a tablespoon or two of vinegar or lemon juice to warm water and then fill the blender halfway before blending. 

This will dissolve the cloudy film and you can just rinse away the vinegar or lemon juice after you are done.

If you don’t want to use any chemicals, fill up half your jar with water and add a few drops of liquid dish soap. 

Turn on the blender at its lowest setting for 30 seconds or until all of the soap is broken down. If necessary, use a sponge to remove any remaining soap on the inside of your jar. Rinse with warm water and air dry before using again.

Do not use an abrasive pad or harsh chemicals to clean your jar as this will scratch the glass and make it look worse. 

To avoid scratching the glass in any way, fill the jar halfway with water and add a few drops of dish soap before blending.  

Is There Anything I Need To Keep In Mind?

There are a few things you need to keep in mind when cleaning your Blendtec blender. 

If you have any residue stuck to the blade or lid, make sure to scrub it away with warm water and soap. 

Never use hot water on the blade as this can damage it, and never put the blender jar in the dishwasher. It is important to keep your blade clean, so be sure to thoroughly clean it after each use and at least once a month.

Related Posts

Why Is My Blendtec So Loud (+Tips To Make It Quieter)

Can You Use Blendtec As A Food Processor?

About Kelly A Hartigan

Kelly A Hartigan has been an avid consumer of blenders for years. She is passionate about helping others find the best blender for their needs and has tried different brands on her quest to find the perfect match.

She loves to blend fruit and vegetables into juices, which she drinks throughout the day for good health.

Leave a Comment