I have a Ninja blender at home. I love it because it’s so easy to use and the blade is really sharp.
The blades are made of stainless steel, which means they won’t rust or need to be replaced for years!
I find that the best thing about my Ninja is how fast it can blend up tough ingredients like ice cubes or frozen fruit smoothies without any chunks.
The only downside is that sometimes the blade loosens up after time, but all you have to do is tighten them with these two silver screws on either side of the blade – it takes less than 30 seconds!
That way your Ninja will work as well as new again in no time!
It also comes with a handy recipe book filled with healthy meals ideas, so the next time you pick up your Ninja blender, you can get started on making some new delicious recipes!
What Causes Loose Blender Blades?
To find out what causes loose blender blades, it’s important to understand how a Ninja blender works.
The Ninja power base has to have enough voltage going through the blender motor in order for the Ninja blender’s blade system to work properly. It’s kind of like a car engine – if there isn’t enough gas going through the cylinder, the spark plug won’t light and the engine won’t start.
If you use your Ninja often, over time it might not be getting the same amount of voltage as before, which is what causes loose blades. This problem can easily be solved by tightening the screws on either side of the blade system .
I hope that helps! If the problem persists, you might want to consider buying a new Ninja blender.
Other Factors that Cause Loose Ninja Blender Blades
Over time, the blades loosen up for several reasons. One reason is that blender users continuously push down on the container to “force” food into the blades instead of just pushing down on it normally to allow gravity do its work.
Another cause of loose blades is removing the blade assembly from the pitcher when not in use or while blender motor base is operating. This can lead to breaking internal components if they are jarred loose during operation.
Some blenders have removable components but this does not apply to all models. A poorly designed blade system may be very difficult or impossible to remove without damaging internal components of the blender motor base which will require replacement.
How To Remove The Blades From A Ninja Blender
In order to remove the blades from a Ninja blender, there are two silver screws on either side of the blade system that you have to unscrew.
The best way to loosen them is by turning them in a counterclockwise direction with a hand held screwdriver or an Allen wrench .
After they’re loose, you can pull up the blade system to take it out.
That’s all there is to it!
How Do You Tighten The Blades On Ninja Blenders
Admit it or not, you might have experienced a situation where your Ninja Blender Blade is loose.
It’s very frustrating to encounter this kind of problem but there are ways on how you can tighten it back up.
Here are the steps to follow to fix Ninja blender:
- Unplug your appliance from an electrical outlet before doing any troubleshooting or repairs.
- Check the blade assembly to make sure that it is securely fastened on the blender pitcher. If you find any loose parts, tighten them with a screwdriver until secure.
- Unplug the blender power cord from its electrical outlet so you can access the motor housing. Use an appropriate screwdriver to remove all four screws on the side of the interior housing.
- Place the blade assembly inside the pitcher and attach it securely by tightening all four screws with a screwdriver. Plugin your blender power cord to resume use.
- Return all internal parts back into their proper positions by tightening them again using an appropriate screwdriver to avoid future overheating or worse, electrical shock.
- Ninja Blade Sharpening
- Best Way To Clean Ninja Blades
- Ninja Blender Blade Types
- Ninja Blender Stuck To Base
Fix Ninja Blender Blade Loose Issue – Final Verdict
With these steps, you should be able to fix your loose blade within minutes and make use of it again.
It’s important to remember that if you fail to tighten the screws with a screwdriver when using the blender, it may cause damage, so always double-check the blade and housing before using your blender.
Now that you know how to tighten the blender blade assembly, you can continue making healthy foods for your family while taking advantage of all its amazing features.
Your ninja blenders are designed to fit your lifestyle so use them carefully and always remember to unplug them from the electrical outlet before checking on any loose parts.
If the steps above will not resolve your problem, you must take it to a certified service provider.
As long as you know how to tighten the blade and secure all necessary parts, you should be able to fix your loose Ninja Blade in no time at all!