A dirty blender can leave behind bacteria, mold, and other nasty things that could make you sick if they’re left unchecked. That’s why it’s important to clean Nutribullet power base every time after use.Â
Things You Need For Cleaning Nutribullet Base
1. Hand gloves
2. Baking soda
3. Warm soapy water
4. White vinegar or hydrogen peroxide
5. Towel
6. A clean surface
As soon as you notice any spilling, stop whatever you are doing, and get the ingredients ready for cleaning the Nutribullet. For your own personal safety, it is best to unplug the blender from the power source before starting the process.
Note that you only need to remove the jar to have access to the power base. Do not submerge the power base in water, because it is not a safe practice.
How To Clean Nutribullet Base
There are many ways to clean your Nutribullet power base, depending on how dirty it is.Â
Follow these steps for a quick way to clean or look at the directions below for more specific details.
As an optional step, if there are any hard-to-wash areas you can soak the blender in warm water with lemon juice for five minutes before rinsing. Hot water may be used as well to expedite the process.
1) Unplug Your Nutribullet Base And Remove All Of Its Parts
The first step is to take the blender apart. Remove the blades, attachments, and extractor cross blade jars from your Nutribullet power base .
Hand Gloves  – These are a must , especially if you have any health issues that may be aggravated by bacteria or mold contact with your skin. The large jar after use is great breeding ground for these types of items. Brush off excess, dry particles using towel or air-dry before putting aside where there’s easy access.
2) Rinse Under Warm Water To Remove Excess Food Particles
The next step is to clean the Nutribullet power base, jar, clean nutribullet blade and attachments with warm water and a mild detergent. Deep clean thoroughly making sure that no food particles remain. Repeat the process if necessary until all residue is removed.
3) Cleaning Your Base – Baking Soda & Vinegar Or Hydrogen Peroxide
An alternative method is to use baking soda mixed with water as an abrasive agent for cleaning the base of the Nutribullet blender (not for individual parts such as blades). This method can be used even on rust-stained areas. Let it soak in warm water before using a sponge to scrub off stained areas.
You may then rinse with hot water and wipe dry afterward. An important tip: Be careful not to mess with the electrical parts and avoid submerging it in water.
4) Rinse Thoroughly Under Warm Running Water
After cleaning your Nutribullet base, rinse it with warm water and let drain before assembling the blender back as you normally would as if you were about to “blend” something. This step ensures that all residue is removed from the blades.
5) Let It Dry
Once all parts are assembled back, allow the machine to air dry.
6) Give It A Wipe With Vinegar Or Hydrogen Peroxide
To complete the cleaning process, wipe down your Nutribullet base with white vinegar or hydrogen peroxide. Use a clean towel for this purpose and ensure there’s no moisture left behind before using it again.
Allow to air dry completely during this step. Keep your blender clean, so you can use it often.
Related Post: How To Operate A Nutribullet
How Often Should I Clean Nutribullet Blender Base?
Cleaning your Nutribullet base should be done on a weekly basis, especially if you use it frequently or have small children in the house.Â
A dirty blender may spread germs and bacteria throughout your kitchen so staying on top of this task is of utmost importance.
Why Is It Important To Keep My Nutribullet Base In Top Shape?
If you want to ensure that your Nutribullet base lasts for years to come, then it’s important that you maintain it well.Â
By regularly cleaning your blender, you can get rid of build-up and other residues that accumulate over time.Â
This will ensure the best performance possible so you can continue to enjoy the power of your Nutribullet for years to come.
Why Is My Nutribullet Leaking?
A common reason why your Nutribullet is leaking might be that the parts are not properly secured together. Ensure they are seated correctly before using it again.
Another reason could be due to loose blades or improper assembly, so double check that everything is tightly in place before blending anything.
Here are some reasons why your Nutribullet might be leaking –
Cracked Jar
Cracked jar might be one of the many reasons why your Nutribullet might be leaking. Make sure you get it replaced as soon as possible.
Improper Way to Add Ingredients
If you’re putting too much product in at one time, this will make your Nutribullet leak from the top. Make sure you follow instructions of adding ingredients slowly during the process.
Hard Water Build-Up Over Time
Build up of hard water might be another reason why your Nutribullet may be leaking from the bottom. This is caused by exposure to minerals and impurities found in tap water over time.
These contents can cause damage to machine parts over prolonged exposure and should be cleaned more often if they occur frequently.
Lack of Proper Storage
If you don’t put your blender in its proper place after using it, this is another reason why your Nutribullet might be leaking. Make sure to place it where it belongs and close the containers tightly before storing.
Falling Over During Use
Dropping your blender while blending can damage parts and cause leakage too. This most often occurs when the jar or blade assembly isn’t secured properly together during use.
How To Prevent Nutribullet Leakage?
There are several things to consider when looking for ways to prevent Nutribullet leakage –
Lubricate O-Rings
If you notice that your blades are leaking, it’s time to lubricate o-rings. This will help keep the unit sealed tightly and reduce leakage over time.
Replace Broken Parts
Broken parts need to be replaced as soon as possible, so if any areas of your Nutribullet are cracked or broken, you’ll want to take care of this right away.
If left unattended, cracks can spread and cause much bigger problems down the road so plan on replacing anything that is cracked or damaged within your Nutribullet.
Hold Machine Upright When In Use
When blending, hold your unit upright at all times while making sure it’s securely fastened together to prevent leaking.
Use Only Approved Ingredients
Only use products that are designed for your Nutribullet and never attempt to blend something without first checking if it’s compatible with the machine.
Using ingredients that don’t fit properly into the container will cause leakage so make sure you understand what can be blended before proceeding.
Clean Your Blender Frequently
If you want your blender to last as long as possible, then cleaning it on a regular basis is important to ensure optimal performance over time.
Cleaning your blender after every use will prevent build-up and residue from accumulating in hard to reach areas or around blades that can cause damage in the future when left unattended.
Where Can I Buy Replacement Parts?
You can find replacement parts for your Nutribullet base on the company’s website.
Make sure you check the model number before ordering any parts so that you get what’s compatible with your blender.Â
You can also find replacement parts at stores like Walmart and Target, but they’re usually more expensive than the company website. You can even order it on Amazon.
When To Replace Leaking Nutribullet Base?
If there is a crack in the jar or base, then it may be time to replace it.Â
Cracks can spread quickly and affect your blender’s performance. If this happens, check out all of the small/replaceable parts such as gaskets and lids to see if they need replacing as well.
Related Post:Â Cleaning A Nutribullet
How To Clean Nutribullet Blender Base – FAQ’s
Can Leakage Damage Nutribullet Power Base?
Yes, leakage can cause problems with the motor if it’s not dried correctly. Make sure to place paper towels under your unit overnight when you’re done using it so that any excess water is absorbed.
How Often Should You Clean Blender Base?
You should clean your base after every use unless you’ve spilled something on it. In this case, make sure to thoroughly clean the area as soon as possible so it doesn’t have a chance to dry out and cause damage.
Can You Wash The Jar In The Dishwasher?
Yes, but only if you place the jar bowl-side down so that water cannot enter through the blade assembly. Make sure that all of the removable parts such as blades and lids are placed in the top rack of the dishwasher for an easier cleaning process.
Can You Use Vinegar To Clean Base?
Yes, vinegar is a great cleaner for your Nutribullet base. But make sure you rinse it out thoroughly after cleaning to avoid damage from left over residue.
How Can I Get Rid Of Odors In My Blender?
To get rid of odors from your blender, pour ½ cup of warm water into the jar and several drops of dish soap. Whisk with a fork until suds start to appear then rinse out completely before using again.
Conclusion
Cleaning your Nutribullet base regularly will ensure that you have a safe and reliable blender every day of the week.Â
By following the steps above, you will be able to keep your Nutribullet in top shape.Â
Remember, a clean blender does not only look better but it’s also more hygienic and safe for everyone to use.
What Do You Think?
Do you have any questions about how to clean your Nutribullet base? Leave us a comment below and we’ll get back to you as soon as possible!